Mit einem speziellen Infrarot-Detektor messen die Forschenden Temperaturveränderungen von Feststoffen. Der Detektor muss mit flüssigem Stickstoff gekühlt werden. © Damian Gorczany

Physics Cool solids

After more than a century, physicists aim to dethrone the tried-and-tested technology of the refrigerator, as cooling can be made more energy-efficient.

The summer of 2023 was the hottest on record worldwide. Devastating wildfires raged in many places, and people suffered due to heat records. In a world that is steadily getting warmer, the demand for cooling is rising, too – and cooling consumes energy. A lot of energy. “As a rule, generating cold is more difficult than generating heat,” says Professor Daniel Hägele, physicist at Ruhr University Bochum. The compressor technology used in today’s refrigerators was invented more than a century ago. “While the technology has been continuously optimized over the years, recent improvements in energy efficiency classes have mostly involved adjustments like tighter seals on doors,” points out the researcher.

This is how refrigerators work

Refrigerators use a refrigerant that’s pumped through the system while its pressure is regulated. Inside the refrigerator, the refrigerant absorbs heat and turns into a gas. It then flows into a compressor that compresses the gas, further increasing its temperature. The refrigerant releases the thus generated heat to the outside through coiled tubes at the back of the fridge. In the process, its temperature decreases, and it turns back into a liquid. Before it’s pumped back into the refrigerator, the pressure of the refrigerant is once again reduced, resulting in a further drop in temperature. Now, the refrigerant can once again absorb heat inside the fridge. This means that on the whole refrigerators generate as much cold as heat, but they keep the two separated, making the inside colder than the outside.

It’s entirely conceivable to introduce techniques for generating cold that are completely different to those currently in use. The team headed by Daniel Hägele from the Spectroscopy of Condensed Matter working group is studying what is known as the caloric effect: Some solid materials change temperature when stretched or subjected to an electric field or magnetic field. You can even try this at home by following the instructions for a mini-experiment in the following info box.

An experiment to do at home

The caloric effect can be experienced first-hand. You only need a balloon that should not be inflated.

Den Ballon ruckartig mit zwei Händen auseinanderziehen. © RUB, Marquard

Das gedehnte Gummi an die Lippen halten. Das Material hat sich erwärmt. © RUB, Marquard

Den Ballon ruckartig mit zwei Händen auseinanderziehen. © RUB, Marquard
Now, remove the balloon from your lips while it’s still stretched and hold it in the air for a few seconds so that the rubber can cool down to ambient temperature.

Dann den Ballon zusammenschnacken lassen. © RUB, Marquard

Jetzt schnell wieder an die Lippen halten. Der entspannte Ballon ist nun kälter als die Umgebungsluft. © RUB, Marquard

Solids in an electric field generate cold

Hägele’s team has been studying the caloric effect for many years. Initially, the researchers used magnetic fields to generate cold with solids. However, this requires field strengths similar to those in an MRI machine – and could therefore not be implemented in a refrigerator or air conditioner. This is why Hägele and his colleagues Jörg Rudolph and Jan Fischer are now working with electric fields. “We can basically use power from the socket,” says Fischer. “For experimental purposes, we amplify the voltage to several thousand volts.”

Daniel Hägele, Jan Fischer und Jörg Rudolph (von links) forschen zum elektrokalorischen Effekt. © Damian Gorczany

We can detect changes of one-thousandth of a degree in one-thousandth of a second – no one else can do it that fast.


Jan Fischer

This is because the Bochum team is interested in special effects. The researchers measure how different materials react to the external electric field, for example changes to temperature. First and foremost, they’re interested in time-resolved effects, i.e. how quickly the temperature decreases or increases when the external electric field changes. “We can detect changes of one-thousandth of a degree in one-thousandth of a second – no one else can do it that fast,” as Fischer describes what makes the Bochum approach so unique.

Being quick pays off

At first glance, it may seem paradoxical that the group is interested in these tiny changes. “We’re actually looking for materials with the largest possible temperature effects,” admits Hägele. “But sometimes you have to start small.” The small changes on the time scale reveal a lot to the researchers about the fundamental processes that lead to temperature changes in solids. Moreover, materials that can quickly change their temperature would be particularly relevant for applications. “In a caloric cooling process, heat is transported away in packets,” explains Jörg Rudolph. “In order to make the process efficient, the best possible approach would be to remove the heat packets quickly one after the other.”

Last but not least, rapid measurements also provide an unadulterated view of the material properties. This is because the heating and cooling samples exchange heat with their surroundings over time, for example with the substrate on which they are mounted. If the researchers measure the temperature very quickly, there’s no time for heat transfer, and they can measure the pure caloric effect.

Measuring slight temperature variations accurately is a surprisingly complicated process.


Jörg Rudolph

But why exactly is the Bochum technique so fast? “Measuring temperature – that may sound simple at first,” says Jörg Rudolph. “However, measuring slight temperature variations accurately is a surprisingly complicated process. You can’t simply hold a thermometer against the sample.” First of all, the sample is much too small, less than a millimeter thick. Secondly, there would be heat exchange between the sample and the thermometer, which would distort the measurements.

Infrared detector as a thermometer

This is why Daniel Hägele devised an experimental setup specifically for these types of measurements several years ago, which his team has now optimized. They deploy a contactless infrared detector to measure the heat energy emitted by the sample. The experimental setup is located in a climate-controlled room on a vibration-stabilized table – a piece of equipment that was rather tricky to install. “The table weighs a ton, so we couldn’t simply put it in the elevator. To get it into the lab, we had to remove two windows and have it hoisted in with a crane,” tells us Daniel Hägele. “Also, it has to stand in a specific spot in the room so that it doesn’t come crashing through the floor,” adds Jörg Rudolph.

Measuring several material properties simultaneously

The setup has now been securely installed in the lab for years, and Hägele, Rudolph and Fischer have used it to measure a number of materials. In addition to measuring rapid temperature changes, they can at the same time capture a second material property in the solids, namely polarization – another aspect that makes the Bochum setup unique. This is useful because highly polarizable materials offer advantages for the generation of cold.

In addition to established materials such as the rare earth gadolinium and various metal alloys, the researchers from Bochum are also exploring other material classes like ceramics and plastic polymers, as these categories have also produced promising candidates. In the process, they focus on environmentally friendly and non-toxic materials. Some of these have already been used by other groups to build demonstrators. “It’s awesome that our fundamental research has such a tangible application,” says Jörg Rudolph. “That’s a powerful motivator.”

Cooling based on the caloric effect is a multi-stage process. Typically, a material can only achieve a cooling of three to four, at most six degrees Celsius in one go. However, a cooling system could consist of multiple chambers, providing cooling by a few degrees at the spots where they connect, thus achieving a significant cooling effect overall.

Many feasible applications

Unlike with conventional refrigerators, cold would no longer be generated using a gas or liquid but a solid material. “The advantage of using a solid material is that it contains more atoms per cubic centimeter,” explains Hägele. “This would allow us to build more compact cooling appliances.” And potentially more efficient ones, too. This could be useful not only for refrigerators and air conditioning systems but also, for example, for hydrogen liquefaction. There would certainly be plenty of applications in a world that is getting warmer and warmer.

Download high-resolution images
Der Download der gewählten Bilder erfolgt als ZIP-Datei. Bildzeilen und Bildnachweise finden Sie nach dem Entpacken in der enthaltenen HTML-Datei.
Nutzungsbedingungen
Die Verwendung der Bilder ist unter Angabe des entsprechenden Copyrights für die Presse honorarfrei. Die Bilder dürfen ausschließlich für eine Berichterstattung mit Bezug zur Ruhr-Universität Bochum verwendet werden, die sich ausschließlich auf die Inhalte des Artikels bezieht, der den Link zum Bilderdownload enthält. Mit dem Download erhalten Sie ein einfaches Nutzungsrecht zur einmaligen Berichterstattung. Eine weitergehende Bearbeitung, die über das Anpassen an das jeweilige Layout hinausgeht, oder eine Speicherung der Bilder für weitere Zwecke, erfordert eine Erweiterung des Nutzungsrechts. Sollten Sie die Fotos daher auf andere Weise verwenden wollen, kontaktieren Sie bitte redaktion@ruhr-uni-bochum.de

Published

Wednesday
08 November 2023
9:21 am

By

Julia Weiler (jwe)

Translated by

Donata Zuber

Share